Certificates Page - Grandstream Networks GXV3500 User Manual

Config Server Path
XML Config File Password
Validate Server
Certificates
DHCP Option 66 Override
Server
3CX Auto Provision
Automatic Upgrade
Randomized Automatic
Upgrade
Disable Telnet
Note:
•
Only XML based automatic provisioning is supported by GXV3500.

Certificates Page

This page allows users to upload up to 6 Trusted CA certificate files which will be trusted by the GXV3500
during SSL exchange.
Also users are allowed to configure the device with custom certificate signed by custom CA certificate under
the Custom Certificate section.
Note: Make sure to not prepend address with "http://" or any other protocol
Sets IP address or domain name of configuration server. The server hosts a
copy of the configuration file to be installed on the GXV3500. Default is
"fm.grandstream.com/gs".
Note: Make sure to not prepend address with "http://" or any other protocol.
Password for encrypt the XML based configuration file.
Enable this option in order to validate certificate with trusted ones during
TLS connection.
If DHCP option 66 is checked, the GXV3500 will attempt to download firmware
file and XML config file from the server URL provided by DHCP overriding
configured Firmware Server Path and Provisioning Server Path (even if left
blank).
Enable or disable the 3CX PnP Auto Provision.
When enabled, the GXV3500 to broadcast the SIP SUBSCRIBE message
during booting up to allow itself to be discovered and be configured by the SIP
platform. The default setting is "Yes".
Checked to enable automatic firmware upgrade and provisioning.
Randomized Automatic Upgrade within the range of hours of the day or
postpone the upgrade every X minute(s) by random 1 to X minute(s).
Check to disable Telnet to enhance security.
GXV3500 User Manual
Version 1.0.3.6
P a g e | 72