Set The 12/24H Mode; Setting The Date; Setting The Sound To "Off " (Silent Mode) - Uwatec Meridian Manual

Table of Contents

Advertisement

2.1.4
Set the 12/24h mode
24 hour display
By  pressing  the  SEL/ESC  button  at  the 
mode  menu  24h  starts  flashing.  With  +/
UP  or  –/DOWN  buttons  you  may  change 
between 24 hour or 12 hour format = am/
pm  displays.  Pressing  SEL/ESC  will  save 
the selection.
F
NOTE: the 12 hour selection will
change the shown day format to
display date in the following sequence:
Month.Date.Year. If you keep the
watch in the 24 hour format, you
will have the date displayed in the
following sequence: Date.Month.Year
This change also takes place in the
watch and in the dive computer log
book.
2.1.5
Setting the date
When  setting  the  date,  by  pressing  the 
SEL/ESC  button,  the  first  digits  will  flash, 
indicating they can be changed by pressing 
+/UP or –/DOWN buttons (in 24h mode the 
first digit is days, in 12h mode the first digit 
SCUBAPRO MERIDIAN
2. Meridian as a watch
is  the  month).  By  pressing  the  SEL/ESC 
button the setting will be saved and move 
to  the  next  digits.  Again  by  pressing  the 
SEL/ESC  button  the  year  digits  after  the 
dot will start flashing.
2.1.6
Setting the sound to "off "
(silent mode)
By  pressing  the  SEL/ESC  button  the  'on' 
setting  will  start  flashing  at  the  bottom  of 
the display. By pressing +/UP or –/DOWN 
buttons you may select 'on' or 'off' for the 
Meridian silent mode for alarms and button 
tones. The sound off selection is protected 
with a code.
Warning
The Sound 'off' selection will disable all
audible dive mode alarms and warnings. This
is potentially dangerous.
F
NOTE: the  only  exception  to  the 
silent  operation  is  the  alarm  clock.  It 
will  remain  activated  even  if  the  main 
setting is: sound off.
To  turn  off  the  sound  a  code  must  be 
entered into the dive computer to activate 
the  change.  The  unlock  code  for  'sound 
off' is 313. When the sound off option has 
been selected the first digit starts flashing. 
By  pressing  +/UP  or  –/DOWN  buttons 
the code number can be changed and by 
pressing  the  SEL/ESC  button  the  code 
number will be stored.
13

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Meridian and is the answer not in the manual?

Questions and answers

Table of Contents