When Writing Or Rewriting; Drag'n Drop Cd+Dvd - Toshiba PSA20 User Manual

Do not use hard disk utilities, including those intended to enhance HDD
access speed. They may cause unstable operation and data damage.
Write from the computer's HDD to the CD/DVD. Do not try to write from shared
devices such as a LAN server or any other network device.
Writing with software other than Drag'n Drop CD+DVD, DVDfunSTUDIO and
DVDMovieAlbum is not recommended.

When writing or rewriting

Please observe/consider the following when you write or rewrite to a CD-R/RW or
DVD-R/-RW/-RAM disc.
Do not perform any of the following actions when writing or rewriting:
• Operate the computer for any other function, including using a mouse or
Touch Pad or closing/opening the LCD panel.
• Start a communication application such as a modem.
• Apply impact or vibration to the computer.
• Install, remove or connect external devices, including the following:
PC card, SD card, USB devices, external display, optical digital devices.
• Use the Audio/Video control button to reproduce music or voice.
• Open the DVD Multi drive
Do not use standby/hibernation while writing or rewriting.
Make sure writing or rewriting is completed before going into standby/
hibernation. Writing is completed if you can open the DVD Multi drive tray.
Set the computer on a level surface and avoid places subject to vibration such
as airplanes, trains, or cars. Do not use an unstable surface such as a stand.
Keep mobile phones and other wireless communication devices away from the
computer.
Always copy data from the HDD to the DVD-RAM. Do not use cut-and-paste.
The original data will be lost if there is a write error.

Drag'n Drop CD+DVD

Note the following limitations when you use Drag'n Drop CD+DVD:
DVD-Video cannot be created using Drag'n Drop CD+DVD.
DVD-Audio cannot be created using Drag'n Drop CD+DVD.
Writing CD/DVDs on DVD Multi drive
4-17