4
Operating procedures of each portion
4-1 Base portion
1
Turning ON the LED illumination
a
2
Using the filter
a
Set the main switch a to (ON).
1
Rotating the brightness adjustment knob b in the arrow direction
2
increases the brightness and rotating it in the opposite direction
decreases the brightness.
b
Engage the filter in the light path if necessary
Engage the filter in the filter holder (window lens a ) of the base portion
1
of the microscope frame.
One to several filters of 45mm in diameter can be inserted in
TIP
stack.
(Insertable thickness: up to 1.6mm)
If it is difficult to attach the filter due to the narrow space,
NOTE
rotate the coarse focusing knob to raise the stage.
CX43
9