GLP KNV Series Quick Start And Safety Manual page 56

www.glp.de
KNV Line
Mounting options
Free-standing on horizontal surface directly or in adjustable floorstand, suspended
alone or in multiple arrays from a rig or other structure, fastened to surface or structure
Installation hardware
KNV Rigging Connector
KNV Module Connector
KNV Floorstand / Hanging Bracket
KNV Line Bracket
KNV Installation Bracket
KNV PSU
Mounting options
Free-standing on horizontal surface, suspended from rig or other structure, fastened to
surface or structure
Installation hardware
Repositionable mounting plate with 1 x M10 threaded hole, 2 x 13 mm installation
hardware holes and 2 x quarter-turn locking points for 89 mm omega bracket
4 x M6 threaded holes in integrated handles
Connections
KNV Dot
Data/DC power in: Cable tail with 6-pin ODS power and data connector with seal
Data/DC power thru: Cable tail with 6-pin ODS power and data connector with seal
KNV Line
Data/DC power in: Cable tail with 6-pin ODS power and data connector with seal
Data/DC power thru: Cable tail with 6-pin ODS power and data connector with seal
KNV PSU
AC mains power in and thru: Neutrik powerCON TRUE1 with sealing cap
DMX/RDM data in and thru: 5-pin XLR
Data and DC power to fixtures: 5 x 6-pin ODS power and data connectors with sealing
caps
Art-Net, sACN: EtherCON in and thru with sealing cap
Fixture software update: Over data link using DProg
Electrical
KNV Dot
DC power source: KNV PSU
Maximum number of fixtures per KNV PSU Data/DC power output: 5
Maximum distance from PSU to last device on Data/DC power link: 50 m/164 ft.
56 KNV Dot and Line Quick Start and Safety Manual Rev. A