Table of Contents
Advertisement
www.glp.de
To secure a KNV Dot, KNV Line or KNV PSU with a safety cable:
See Figure 8. Fasten the safety cable to the attachment point (arrowed) in the
back of the fixture or PSU.
Fasten the safety cable to a secure anchoring point such as a truss chord or an
eyebolt screwed into a secure surface, taking up as much slack as possible in the
safety cable (by looping it more than once around the truss chord, for example).
Check that the safety cable will catch the device safely if a primary attachment
fails.
20
Figure 8. Safety cable attachment points
KNV Dot and Line Quick Start and Safety Manual Rev. A
Advertisement
Table of Contents
