Eye Safety - GLP KNV Series Quick Start And Safety Manual

www.glp.de
• Do not place any optical components other than KNV accessories onto the front of
the fixture.
• Do not stick filters, masks or other materials onto the fixture. Do not block the light
output in any way. The front surface becomes hot during operation and can melt or
ignite objects that are in contact with the surface. Ensure that the front surface Is
clean and unobstructed at all times in order to prevent a fire hazard and damage
to the fixture.
• The fixture's optical components can focus the sun's rays, creating a risk of fire and
damage. Do not expose the front of the fixture to sunlight or any other intense light
source, even from an angle.

Eye safety

• KNV Dot and Line fixtures are classified as a Risk Group 3 lighting fixture according to
EN 62471. Possibly hazardous radiation emitted. Do not stare into the light output
from the fixture. May be harmful to the eyes.
• Do not look at the fixture's light output with optical instruments or any device that
may concentrate the light output.
• Make sure that persons near to or working on the fixture are not looking directly into
the light output when the fixture lights up suddenly. This can happen when power is
applied, when the fixture receives a DMX signal, or when certain control menu items
are selected.
• The warning below is printed on KNV Line fixtures and added as a tag on KNV Dot
cable tails. Do not remove or cover the warning. If the warning becomes impossible
to read, replace it with a label reproduced from this illustration:
• Provide well-lit conditions to reduce the pupil diameter of anyone working on or
near the fixture.
8 KNV Dot and Line Quick Start and Safety Manual Rev. A