7. Connecting to DMX data .............. 25 8. Starting and stopping operation........... 26 9. Service ..................... 27 Cleaning ..................27 Installing a glare shield .............. 27 Installing a diffuser ..............28 GLP Service and Support ............28 10. Technical specifications .............. 29 11. Dimensions ..................31...
Warning! Risk of eye injury. General safety information Read this manual carefully before installing, using or servicing the Fusion Stick FS20 lighting fixture. If you have any doubts or questions about how to use the fixture safely, contact your GLP® supplier for assistance. Your GLP supplier will be happy to help.
• Check the GLP website at www.glp.de and make sure that you have the latest version of this manual. Check the fixture software version indicated on page 2 of this manual and then use the fixture’s control panel to check the version installed in the...
- US power cable: 16 A, 14 AWG, UL-listed, E304117, SJT, 4.9 ft. - EU power cable: 16 A, 1.5 mm², H07RN-F, 1.5 m. Do not connect more than four (4) Fusion Stick FS20 fixtures to power in a chain at 100-120 V, 60 Hz.
Do not use strobe effects for extended periods. • Comply with local regulations on the use of strobe lighting and notify the public in advance with highly visible warning signs when strobe effects are used. Fusion Stick FS20 Quick Start and Safety Manual Rev. A...
Do not attempt to use a fixture that is obviously damaged. • Do not modify the fixture in any way not described in its user documentation. • Install genuine GLP parts only. Fusion Stick FS20 Quick Start and Safety Manual Rev. A...
• Do not aim other high-powered beam lights directly at the fixture. Do not operate the fixture in ambient temperatures above 40° C / 104° F. Allow free airflow around the fixture. Fusion Stick FS20 Quick Start and Safety Manual Rev. A...
‘drip loops’ before connectors. • Create loose cable bends only. Do not subject connections to bending forces or allow connections to bear the weight of long lengths of cable. Fusion Stick FS20 Quick Start and Safety Manual Rev. A...
• Transport the fixture in its original packaging to protect it from damage caused by shocks during transportation. • Store the fixture in a dry location when not in use. Fusion Stick FS20 Quick Start and Safety Manual Rev. A...
E – Control panel with OLED display F – DMX OUT/THRU (5-pin XLR) G – AC mains power OUT/THRU (Neutrik powerCON TRUE1) H – Pressure equalization valve I – Mounting point for optional WDMX antenna Fusion Stick FS20 Quick Start and Safety Manual Rev. A...
German Light Products® 4. Features The Fusion Stick FS20 from GLP can be used indoors in permanent and temporary installations. Its rugged construction and IP65 rating mean that it can also be used outdoors in temporary installations if precautions are taken to prevent immersion in water and damage from direct sunlight.
The safety cable must be approved for the weight that it secures. In multiple installations, each fixture must have its own safety cable. Figure 3. Safety cable attachment points Fusion Stick FS20 Quick Start and Safety Manual Rev. A...
See Figure 4. Push the quarter-turn fasteners on the brackets into the fastener mounting holes on the back of the fixture. Turn both quarter-turn fastener handles on each bracket a full 90° clockwise to lock the brackets to the fixture. Fusion Stick FS20 Quick Start and Safety Manual Rev. A...
For instructions on installing an FS20 fixture standing vertically on a horizontal surface, see ‘Vertical installation standing on a surface’ on page 21. Fusion Stick FS20 Quick Start and Safety Manual Rev. A...
Installing on a rigging truss or similar structure You can suspend an FS20 fixture from a rigging truss or pipe using either the fixture’s Tilt Brackets or the Clamp Brackets that are available from GLP as optional accessories for the FS20.
Page 18
Figure 9. Clamp Brackets and rigging clamps Hold the fixture up to the truss chord, pass the rigging clamps around the truss chord, then tighten the clamps to install the fixture securely on the truss. Fusion Stick FS20 Quick Start and Safety Manual Rev. A...
Adapter Set Obtain a truss rigging clamp and omega bracket with quarter-turn fasteners that are approved for the weight that they will support. Check that they are in perfect condition. Fusion Stick FS20 Quick Start and Safety Manual Rev. A...
Continue fastening fixtures to each other as described above to form a vertical chain. Do not create a chain that contains more than six (6) fixtures in total. Fusion Stick FS20 Quick Start and Safety Manual Rev. A...
C in the Figure 14. End Plate bolted to Base corners of the plate. Make sure that it is Plate impossible for the fixture to fall or be knocked over. Fusion Stick FS20 Quick Start and Safety Manual Rev. A...
Page 22
Make sure that it is impossible for the two fixtures to fall or be knocked over. If the arrangement is not completely safe, secure it with a safety cable or reinstall the fixtures using a larger F34 truss base plate. Fusion Stick FS20 Quick Start and Safety Manual Rev. A...
/ power plug on the supplied power cord / input cable. If you do this, check that the cord cap / plug is rated minimum Fusion Stick FS20 Quick Start and Safety Manual Rev. A...
(4) fixtures in total. If you are using 200-240 V, 50 Hz AC mains power you can continue connecting fixtures Mains OUT to Mains IN until the chain contains a maximum of eight (8) fixtures total. Fusion Stick FS20 Quick Start and Safety Manual Rev. A...
FS20 fixtures support the USITT DMX 512A signal protocol. They also support RDM (Remote Device Management). If you would like advice with planning and installing a DMX link, your GLP supplier will be happy to provide assistance. Fusion Stick FS20 Quick Start and Safety Manual Rev. A...
To start operation, check that nobody is looking into the front of the fixture, then apply power to the AC mains power circuit. To stop operation, shut down power to the AC mains power circuit. Fusion Stick FS20 Quick Start and Safety Manual Rev. A...
Insert the two supplied grub screws into the threaded holes (arrowed) in the side of the fixture and tighten them until they grip the Glare Shield firmly. Fusion Stick FS20 Quick Start and Safety Manual Rev. A...
Check that the grub screws now prevent the diffuser from sliding out of the front of the fixture. GLP Service and Support Contact information for the nearest GLP Service and Support is available online at www.glp.de/en/service, by email at info@glp.de, or by telephone at the following numbers: •...
Maximum power consumption, all LEDs at 100% output: 330 W Maximum permitted number of fixtures daisy-chained to power 4 x FS20 total @ 100-120 V, 60 Hz 8 x FS20 total @ 200-240 V, 50 Hz Fusion Stick FS20 Quick Start and Safety Manual Rev. A...
Page 30
Height including bracket: 231 mm / 9.09 ins. Height without bracket: 181 mm / 7.12 ins. Width: 90 mm / 3.54 ins. Depth: 1006 mm / 39.60 ins.) Weight: 12.5 kg (27.6 lbs.) Fusion Stick FS20 Quick Start and Safety Manual Rev. A...
German Light Products® 11. Dimensions FS20 with folding brackets All dimensions are in millimeters Folding brackets Fusion Stick FS20 Quick Start and Safety Manual Rev. A...