Breather Plug Checking And Cleaning - KUHN GMD16 Operator's Manual

Checking the tension
- Exert a force of 3.5 daN on the belt:
• The deflection H must not exceed 10 mm (0.39'').

10.3.2 Breather plug checking and cleaning

From the working position:
- Remove breather plug (1) and its seal.
- Clean and check breather plug for good
functioning (1).
- Reinstall breather plug (1) and its seal.
74
10. - Maintenance and storage
Disc mower
GMD16-GMD20
H
1
KN225BGB_A