Adjusting The Machine - KUHN GMD16 Operator's Manual

- On machine side, attach guard chain to the main
frame (1).
Immediately replace any worn or damaged
guard.

6.2.9 Adjusting the machine


Frame height and check chains.
Tractor fitted with a hydraulic position control
function:
- Lower tractor lift linkage to obtain a distance (H)
slightly exceeding 400 mm (1'4'') between the
hitch pins and the ground.
- Note the corresponding lever position in the tractor
cab.
The distance between the Hitch pins and the
ground must be of 400 mm (1'4'').
It is not necessary to use the check chain
supplied with the machine.
48
6. - Putting into service
Disc mower
GMD16-GMD20
1
KN225BGB_A