Check Angle Gearbox Oil Level - KUHN GMD16 Operator's Manual

10.3.4 Check angle gearbox oil level

- Regularly check the oil level:
• Place the cutterbar in horizontal position.
• Remove drain plug (1) and its washer.
• Check the oil level.
The oil level must reach the lower edge of the
emptying hole:
• Top up if necessary (Fill via the filler stopper (2)).
• Clean and reinstall drain plug (1) and its washer.
Replace if necessary.
• Clean and reinstall filler plug (2) and its washer.
Replace if necessary.
76
10. - Maintenance and storage
2
Disc mower
GMD16-GMD20
1
KN225BGB_A