Maintenance And Storage; Frequency Chart - KUHN GMD16 Operator's Manual

10. Maintenance and storage

Before carrying out any maintenance or
repairs on the machine, switch off the tractor
engine, remove ignition key, wait until all
moving parts have come to a standstill and
apply park brake.

10.1 Frequency chart

Maintenance intervals are indicated for
normal conditions of use.
Lubrication
Oil change
- The cutterbar.
- The side angle gearbox.
Oil
- The moving parts and pivot
points.
Grease
- Lubricate cylinder slide.
66
10. - Maintenance and storage
After the first
10 hours of use

Every 50 hours


Disc mower
GMD16-GMD20
Every 200 hours
or at the end of
the season

KN225BGB_A