Cleaning the machine
- Regularly clean the rotor and the machine inner
panels.
2. Lubrication
- Clean grease nipples before greasing.
Lubricate with multi-purpose grease grade
NLGI 2.
PTO shaft
- Every 8 hours:
• universal joints (1).
- Every 20 hours:
• transmission tube (2).
- Every 40 hours:
• Guide rings (3).
• locking pins (4).
Lubricate with multi-purpose grease grade
NLGI 2.
Grease:
- Roller bearing housings.
Fill the grease zerks until fresh grease oozes
out of the lubricated part. Then wipe off the
excess grease.
52
Maintenance and storage
Power tiller
1
2
3
3
4
EL82
1
4