Required Equipment; Pto Shaft - KUHN GMD16 Operator's Manual

5.3

Required equipment

The machine is factory fitted with the following
equipment:

5.3.1 PTO shaft:


1 3/8'' - 6 spline pto shaft
A specific pto shaft is available as option for tractors
equipped with a 1 3/8'' - 6 spline pto stub.
or

1 3/8'' - 6 spline pto shaft (With free wheel
clutch)
This pto-shaft with free wheel avoids shocks
generated by the inertia of the rotating components
during deceleration or stopping of the tractor
engine.
or

32 x 38 - 8 spline pto shaft
A specific pto shaft is available as option for tractors
equipped with a 32 x 38 - 8 spline pto stub.
KN225BGB_A
Disc mower
GMD16-GMD20
5. - Machine specifications
37