KUHN GMD16 Operator's Manual page 59

If the break-away latch releases too easily after
reset, tighten nut (1) to increase spring washer
compression slightly.
Respect spring washer layout.
Basic adjustment:
L= 96 mm (3.8'')
For proper functioning of the safety, measure L
must not be below 91 mm (3.60'').
In case of clogging:
Before carrying out any maintenance or
repairs on the machine, switch off the tractor
engine, remove ignition key, wait until all
moving parts have come to a standstill and
apply park brake.
- Lift and lock front guard.
- Remove foreign body.
- Check that the mowing unit has not been
damaged.
- Check rotating components for damage.
- Lower and lock front guard.
KN225BGB_A
Disc mower
GMD16-GMD20
L
1
8. - Instructions for work
59