KUHN GMD16 Operator's Manual page 18

How to proceed:
Stage 1:
To measure:
- Tractor tare (T).
Stage 2:
- Couple the machine to the tractor.
To measure:
- Load on front axle (t1):
• Tractor + machine (transport position).
To do:
- If the front axle load (t1) is below 20% of the tractor
tare (T), add ballast weights (M1) to exceed the
minimum load on the front axle.
Example:
• (T) = 7500 kg (16535 lb)
• 20% of T = 1500 kg (3300 lb)
• (t1) = 700 kg (1545 lb).
• 700 kg (1545 lb) < 1500 kg (3300 lb).
- Add ballast weights until the minimum front axle
load is exceeded.
- Repeat checking procedure.
18
4. - Safety
T = _____kg
T = ________ kg
t1 = _____kg
t1 = ________ kg
t1 < 20% T t1 < 20% T
t1 t1 ≥ 20% T
20% T
Disc mower
GMD16-GMD20
KN225BGB_A