Outer And Inner Cones - KUHN GMD16 Operator's Manual

Check if there is still a minimum gap X =
1 mm (0.04'') between the disk lower part and
the cutter bar wear plates (c).
If this is not the case, fit one (maximum two)
spacer(s) between the disc and the mounting
hub (d): Part no. 56807100.

10.3.8 Outer and inner cones

- Check torque of attachment bolts (1) of outer and
inner cone covers (2) and (3):
• Torque: 6 daNm (44 lbf ft).
- Replace any lost or damaged cover.
82
10. - Maintenance and storage
c
d
1
2
Disc mower
GMD16-GMD20
1
3
KN225BGB_A