KUHN GMD16 Operator's Manual page 72

From the transport position:
- Remove filler plug (1) and its washer.
- Place a container of sufficient capacity under drain
plug.
- Remove drain plug (2) and its washer.
- Allow oil to drain completely.
- Wait for dripping to stop.
- Place the cutterbar in horizontal position.
- Pour the correct oil quantity and quality through the
opening of the filler plug (1).
Checking oil level of the lateral bevel gearbox:
- Place the cutterbar in horizontal position:
• The oil level must reach the lower edge of the
emptying hole.
- Clean and reinstall drain plug (2) and its washer.
- Clean and reinstall filler plug (1) and its washer.
72
10. - Maintenance and storage
2
Disc mower
GMD16-GMD20
1
KN225BGB_A