Instructions For Work; Putting The Machine Into Work Position - KUHN GMD16 Operator's Manual

Before placing the machine in working
position:
- Check that nobody is within the
machine pivoting area.
- If there is someone, make sure the
person moves away.
8.1 Putting the machine into work
position
From the transport position:
- Fully lift tractor lift linkage.
When optional equipment is used, follow
specific procedures mentioned in the related
section:
• Optional
hydraulic cutter bar lift pump.
- Activate single acting valve of transport/work
positioning cylinder to lighten pressure on
transport lock.
- Pull the release cord until transport lock is released
(1).
- Place the single acting valve of the mowing unit lift
cylinder in floating position to lower the mowing
unit.
KN225BGB_A

8. Instructions for work

equipment / Manual
Disc mower
GMD16-GMD20
1
53
8. - Instructions for work