Instructions For Transport; Putting The Machine Into Transport Position - KUHN GMD16 Operator's Manual

7. Instructions for transport

Before placing the machine into transport
position:
Wait until the rotating parts have come to a
complete stop.
Check that nobody is located in the machine
pivoting area. If there is someone, make sure
the person moves away.
7.1 Putting the machine into
transport position
From the working position:
- Pull handle (1) to unlock front guard.
- Raise front guard until lock is automatically
engaged.
- Lift the machine using the tractor's lift linkage.
When optional equipment is used, follow
specific procedures mentioned in the related
section:
• Optional
hydraulic cutter bar lift pump.
- Operate single acting transport/work position
cylinder to place the mowing unit in transport
position:
• The machine automatically locks in transport
position.
The machine is in transport position.
Never engage the tractor PTO drive when the
machine is in transport position.
KN225BGB_A
equipment / Manual
Disc mower
GMD16-GMD20
1
7. - Instructions for transport
51