Before placing the machine into transport
position:
Wait until the rotating parts have come to a
complete stop.
1. Putting the machine into transport
position
- The transport position is obtained by raising the
tractor's three-point linkage.
Side guards can be folded upwards to reduce
the machine width for transport.
Never engage the tractor PTO drive when the
machine is in transport position.
2. Conformity with the road regulations
- Check that reflectors are clean.
Before driving the machine on public roads,
ensure that the machine complies with
current highway code regulations.
$Instructions for transport
Power tiller
EL82
35
Instructions for transport