Appendix C: Settings - Trane Agility HDWA Installation, Operation And Maintenance Manual

Appendix C: Settings

Chiller Settings
Setpoint Source
Front Panel Hot Water Command
Front Panel Chilled Water Setpoint
Front Panel Hot Water Setpoint
Front Panel Ice Building Command
Front Panel Ice Termination Setpoint
Ice to Normal Cooling Timer Setpoint
Front Panel Demand Limit Setpoint
Front Panel Base Loading Setpoint
Front Panel Base Loading Command
Differential to Start
Differential to Stop
Condenser Water Pump Off Delay
Evaporator Water Pump Off Delay
Evap Low Water Flow Warning Setpoint
Power-Up Start Delay
Chiller Power Demand Time Period
Service Settings
Low Evaporator Water Temp Cutout
Low Refrigerant Temperature Cutout
Local Atmospheric Pressure
Maximum Capacity Limit
Minimum Capacity Limit
BAS Setpoint Power Loss Store Enable
Capacity Control Softload Time
Demand Limit Softload Time
Demand Limit Startup Target
Condenser Pressure Limit Setpoint
Feature Settings
Ext Chilled/Hot Water Setpoint Enable
External Demand Limit Setpoint Enable
Ice Building Feature Enable
Minimum Capacity Timer
Security
LCI-C Diagnostic Encoding
External Base Loading Setpoint Enable
Chilled Water Reset
Chilled Water Reset Type
Return Water Reset Ratio
Return Water Start Reset
Return Water Maximum Reset
Outdoor Air Reset Ratio
Outdoor Air Start Reset
Outdoor Air Maximum Reset
72
Value
Value
Value
Value
HDWA-SVX001D-EN