Equipment Settings; Viewing The Settings Screen; Viewing And Changing Equipment Settings; Screen - Trane RTHD series Installation, Operation And Maintanance

Figure 50. Report Compressor Screen
Table 27. Report Compressor Screen Items
Description
Compressor Running Status
Average Motor Current %RLA
Compressor Starts
Compressor Running Time
Oil Loss Level Sensor
Discharge Temperature
Discharge Temperature
Compressor Oil Pressure
Evaporator Refrigerant Pressure
Condenser Refrigerant Pressure
Differential Refrigerant Pressure
Figure 51. Report Motor Screen
Table 28. Report Motor Screen Items
Description
Active Current Limit Setpoint
Average Motor Current %RLA
Starter Motor Current L1 %RLA
Starter Motor Current L2 %RLA
Starter Motor Current L3 %RLA
Starter Motor Current L1
Starter Motor Current L1
Starter Motor Current L1
Starter Input Voltage AB
Starter Input Voltage BC
Starter Input Voltage CA
Average Motor Current
Average Phase Voltage
RTHD-SVX02H-EN
Resolution Units
On,Off Text
XX.X% %RLA
XX Text
XX:XX Hr:Min
Wet, Dry Text
X.X °F / °C
X.X °F / °C
XXX.X PSIA/kPaA
XXX.X PSIA/kPaA
XXX.X PSIA/kPaA
XXX.X PSIA/kPaA
Resolution Units
X.X %RLA
X.X %RLA
X.X %RLA
X.X %RLA
X.X %RLA
X.X A
X.X A
X.X A
XXX.X V
XXX.X V
XXX.X V
X.X A
XXX.X V
Operator Interface Controls

Equipment Settings

You can use the TD7 display to monitor and change a
variety of equipment settings.

Viewing the Settings Screen

Touch the Settings button in the main menu area (see
Figure 43) to view the Settings screen. Equipment Set-
tings identifies a column of buttons located on the
screen (see the outlined column in
tons are:
• Chiller Settings
• Feature Settings
• Chiller Water Reset
• Manual Control Settings
Each of these buttons provide access to a screen that
contains additional buttons related to eachtopic. This sec-
tion provides detailed information about these screens.
Figure 52. Setting Screen
Viewing and Changing Equipment Set-
tings
Each button in the Equipment Settings column on the
Settings screen takes you to a menu screen that contains
a group of buttons. Each button displays the name of a
setting and its current value(Figure
to view a screen where you can change the setting for
the featureshown on the button.
Note: A page number appears in the lower right corner
of the screen. If a screen contains more than one
page, up/down arrows also appear for viewing
the other pages, as in
Figure 52). The but-
53). Touch any button
Figure 53
87