3. Operation Procedures
3-2 Binding Operation
3-2-1 Binding Start
This section shows how to start binding
operation.
1.
Press "Motor" icon on the binding mode
page.
- Belt starts to rotate.
2.
Press start button on collator to turn on
collator.
NOTE
- When using VAC-100, it can be turned on
with start button on SPF-20A.
3.
Press start button again to start collating
and binding operation.
4.
To stop the collating operation, press
"Stop" icon on the binding mode page of
SPF-20A or press stop button on collator.
NOTE
- When "Stop" icon is pressed again, belts of
collator and SPF-20A stop. The SPF-20A
ejects the booklets in process before stopping
the operation.
60 min.
60 min.
Motor
60 min.
60 min.
66
Stop