Horizon Fitness SPF-20A Manual page 102

6. Move and Installation
6-3 SPF-20A Installation
5.
Construct the attached upper right cover
with lower right cover. (Use screw set 2)
After constructing it, check if the cover
opens or closes smoothly.
6.
Place the cover to the SPF-20A.
NOTE
-The locking screws are already installed at
the holes of the SPF-20A. Remove all six
screws from the SPF-20A and use four of
them.
-When placing the cover, insert the connector
which comes out from inside of the machine
to the bushing which is at lower right side of
the cover.
Upper Right
Cover
B4-8BC
96
Right Lower
Cover
W4S
N4
Bushing