Re-Fitting The Transit Bars - Miele W 3725 Operating Instructions Manual

Installation and connection
,
To avoid the risk of injury the
holes for the transit bars must be
covered after the transit bars have
been removed.
^ Fit the covers on to the two holes.
Then plug the holes as shown with
the caps.
46
^ Secure the transit bars to the back of
the washing machine. Make sure that
holes b are fitted over retainers a.
,
The washing machine must not
be moved without the transit bars in
place.
Store the transit bars as shown or
keep them in a safe place for future
use. They must be re-fitted if the
machine is to be moved again
(e.g.when moving house).

Re-fitting the transit bars

Re-fitting is carried out by reversing the
procedure.