RadioLink T8FB Instruction Manual page 7

Signal Working Mode
(1) PWM Working Mode: Receiver indicator is RED with all 8 channels output PWM signal.
Antenna
(2) SBUS/PPM Working Mode
Receiver indicator is Blue(Purple) with 8 channels output in total. Channel 1 is SBUS signal, channel 2 PPM
signal and channel 3 to 8 PWM signal.
Antenna
S-BUS&PPM and PWM signal change:
Short press the ID SET on the receiver twice within 1s to switch the SBUS/PPM signal to PWM signal. When
the RED LED is on, signal output is PWM. When both RED and BLUE LEDs are on. Signal output is
SBUS&PPM.
MINI Receiver R8FM
T8FB is also compatible with 2.4G 8 channels supper mini receiver R8FM, which support S-BUS and PPM
signal working at the same time, supper mini size, is designed for racing drone.
LED
Binding Button (ID SET)
LED
Binding Button(ID SET)
4
RadioLink Electronic Ltd
www.radiolink.com
CH8 (AUX)
CH7 (AUX)
CH6 (AUX)
CH5 (AUX)
CH4 (RUDD)
CH3 (THRO)
CH2 (ELEV)
CH1 (AILE)
CH8 (AUX), PWM
CH7 (AUX),PWM
CH6 (AUX),PWM
CH5 (AUX),PWM
CH4 (RUDD),PWM
CH3 (THRO),PWM
PPM
SBUS