RadioLink Electronic Ltd
www.radiolink.com
2)"BASIC": There are six parameters to setup including "REV""SUB""EPA-L""EPA-R""F/S""DELAY"
REV: Defines the relationship between the transmitter controls and the receiver output for channels with
options of NORM and REV. Make sure to check all servos move to the correct direction as wish under
control. Make sure to check all servos move to the correct direction under control.
SUB: Makes small changes or corrections to the neutral position of each servo. The default is 0 setting by
factory setting. That is, no SUB-TRIM. The range is from -120 to +120 and can be modified with actual need.
It's advised to center the digital trims before making SUB-TRIM changes, and keep all of the SUB-TRIM
11