Remote Configuration Setup - Proxim Skyline User Manual

Setup Guides
Remote configuration setup
The Skyline Wireless Broadband Gateway can be set up so that it can be
configured from any computer on the Internet. To do this, you set up the
Skyline Wireless Broadband Gateway's IP Address (the default address is
192.168.0.1) as a virtual web server. Once set up, the gateway can be
configured by entering this IP Address into any system on the Internet
and then entering the appropriate password.
Note:
The screens below show the settings needed for remote configuration.
1. Access the Advanced Internet Features screen from the menu at the left of
any web configuration screen.
2. Click the Virtual Servers Enable button.
3. Click the Virtual Servers link to access the Virtual Servers screen.
It is an important security consideration that a password must be
entered to prevent unauthorized access to the local network.
71