Configuration
30
Status
Clicking the Status button will open a status screen. The screen will indicate the
local network status, or the status of the connection to the Internet the Skyline
Wireless Broadband Gateway is configured to use.
Skyline Wireless Broadband Gateway & Local Network
This screen shows current information about your local network configuration.
Buttons:
Use the Refresh Screen button to update the data.
Skyline Wireless Broadband Gateway
Firmware Version.............................. Version of the firmware (embedded
software) which is currently installed on the Skyline Wireless Broadband Gateway.
Hardware ID ..................................... The hardware ID of the Skyline Wireless
Broadband Gateway.
Network Address Translation ........... This displays Enable or Disable depending
on the NAT setting for the Skyline Wireless Broadband Gateway (see page 16).
Local network Port
Hardware (MAC) Address ................. The hardware address of the Skyline
Wireless Broadband Gateway, as seen by other devices on the local network.
IP Address ........................................ The IP Address of the Skyline Wireless
Broadband Gateway, as seen by other devices on the local network.