Local Network Port; Local Network; Dhcp Server - Proxim Skyline User Manual

Configuration 24

Local Network Port

Use the Local Network Port screen to configure your local network settings.
Buttons:
The Save button saves any data entered on screen. The Cancel button
cancels data entered since the last save.

Local Network

It is recommended that you leave these settings at their default.
Local Network Port IP Address......... The IP Address of your Skyline Wireless
Broadband Gateway. Use the default value of 192.168.0.1.
Network Mask .................................. The default value of 255.255.255.0 is
standard for small networks.

DHCP Server

The Skyline Wireless Broadband Gateway can act as a DHCP server, providing IP
Addresses to computers on your local network.
DHCP Server Operation .................... If Enabled, the Skyline Wireless Broadband
Gateway will function as a DHCP server, and computers configured as DHCP
clients on the local network will automatically receive an IP Address from the
Skyline Wireless Broadband Gateway.
Start IP Address/Finish IP Address .......... These define the range of IP Addresses
used by the DHCP server (the maximum number of clients allowed is 253).
DNS (Domain Name Server) IP Addresses.........Replace the default DNS with DNS
information from your ISP. Multiple entries will be accessed in the order entered.