Home Configuration - Proxim Skyline User Manual

62
@Home configuration
@HOME
served IP Address. If you are using a fixed IP Address with your @HOME
cable modem and do not know the host name, then you can ignore this
section and set up the Skyline Wireless Broadband Gateway with the
assigned static IP Address from @HOME.
If you are using DHCP with the @HOME cable modem, then you must
enter the host name into the
Direct Connection
web configuration utility.
1.
2.
3.
4.
5.
uses a
host name
screen of the Skyline Wireless Broadband Gateway's
Click the Configure button in the Skyline Wireless Broadband Gateway web
utility.
Click Direct Connection, and then click the Configure button.
The Broadband Port - Direct Connection screen will appear. This screen will
contain the Device Name and Hardware (MAC) Address information you
need to configure the Skyline Wireless Broadband Gateway for use with your
cable modem. The device name appears as SC002350 in the Device Name
field below:
Enter the host name or client ID from @Home into the Device Name field.
Save your changes and finish the configuration.
, also referred to as a
field on the
Device Name
, to obtain a DHCP
client ID
Broadband Port -