Dhcp For Macintosh - Proxim Skyline User Manual

Getting Started

DHCP for Macintosh

To set your Macintosh up to connect to the Internet through the Skyline Wireless
Broadband Gateway using DHCP:
1.
2.
3.
4.
Open the TCP/IP Control Panel. Select Ethernet (or Wireless, or AirPort or
whatever you are using to connect this computer to your local network) from
the Connect via pop-up menu.
Select Using DHCP Server from the Configure pop-up menu. The DHCP Client
ID field can be left blank.
Close the TCP/IP panel, saving your settings.
Next, connect to the Skyline Wireless Broadband Gateway.
• If this is a computer on the Ethernet network, see page 13.
• If this is a wireless computer, see page 14.
8