Advanced Configuration
38
Existing Special Applications
Existing Special Applications are listed here. Use the pop-up menu to select the
applications you want.
Data for this application
Name ...........................................Enter a name to identify each entry.
Enable .........................................Use this to Enable or Disable support for each
application, as required.
Outgoing Control
Protocol .......................................The protocol (TCP or UDP) used when you
connect to the special application service.
Port Range...................................The beginning and end of the range of port
numbers used by the application server, for data you send to it. If the application
uses a single port number, enter it in both the Start and Finish fields.
Incoming Data
Protocol ...................................... The protocol (TCP or UDP) used when the
application or service sends data to you.
Port Range...................................The beginning and end of the range of port
numbers used by the application server when data is sent to you. If the
application uses a single port number, enter it in both the Start and Finish fields.