Dhcp Table; Broadband Status - Direct Connection - Proxim Skyline User Manual

Configuration
Network Mask ................................. The Network Mask (Subnet Mask) for the IP
Address on the local network.
DHCP Server ..................................... This shows whether the DHCP Server
function is Enabled or Disabled.

DHCP Table

This table lists the devices on the local network which have been allocated IP
Addresses by the Skyline Wireless Broadband Gateway's DHCP server function.
Only IP Addresses in use will be listed.
IP Address ........................................ The IP Address which has been allocated by
the Skyline Wireless Broadband Gateway's DHCP server.
Hardware (MAC) Address ................. The hardware address of the device which
has been allocated a IP Address.
Status ............................................... Shows if the IP Address is Leased (the IP
Address is allocated to the device shown) or Reserved.

Broadband Status - Direct Connection

This screen shows current information about your broadband configuration using
a direct connection to your ISP.
Buttons:
Hardware (MAC) Address ................. The hardware address of the Skyline
Wireless Broadband Gateway, as seen by devices on the Internet and your ISP.
Use the Release DHCP button to verify DHCP is being received from
your ISP. Use the Refresh button to update the screen. The Skyline
Wireless Broadband Gateway/Local Network Status link takes you to
that status page (see page 30).
31