Media One Configuration - Proxim Skyline User Manual

Setup Guides
Media One configuration
Media One (as well as some other cable companies) hard code the MAC
address for the Ethernet card that you are using to connect to the cable
modem at the time they install the service.
For the Internet connection to work after you install the Skyline Wireless
Broadband Gateway, one of two things must happen:
the cable modem provider must change the hard coded MAC address
I
to the broadband port MAC address for the Skyline Wireless Broad-
band Gateway
you must change the MAC address used by the Skyline Wireless
I
Broadband Gateway to match the one originally used by the Ethernet
card the cable company installed
It is a good idea to check with your cable company to be sure before
changing the Skyline Wireless Broadband Gateway's address, but if you
do need to change the MAC address on the gateway, follow these steps:
1. Click the Configure button in the Skyline Wireless Broadband Gateway web
utility.
2. Click Direct Connection, and then click the Configure button.
3. The Broadband Port - Direct Connection screen will appear.
63