Using Special Internet Applications; Virtual Servers - Proxim Skyline User Manual

Advanced Configuration

Using Special Internet Applications

To enable or disable an application: Select it from the drop-down list. Click Get
Data. Check Enable or Disable. Click Update.
To delete an application: Select it from the drop-down list. Click Delete.
To modify an application: Select it from the drop-down list. Click Get Data. Make
any desired changes, and then click Update.
To create a new application: Click Clear Form. Enter the required data and click
Add.
To list all applications: Click the List All button.

Virtual Servers

In order for Internet users to connect to a virtual server on your local network, the
virtual server should have a static IP Address.
The Skyline Wireless Broadband Gateway supports two types of Virtual Servers:
IMPORTANT: The total number of Virtual Servers (both pre-defined and user
defined) which can be used is 10.
Select the server type or types you wish to use, enter the IP Address of the server
on your local network, and click Save.
• Pre-defined - Standard server types. The only data required is the IP
Address of the server on your local network.
• User-defined - Non-standard servers. You must provide additional informa-
tion about the server.
39