Broadband Status - Pppoe; Status - Proxim Skyline User Manual

Configuration
IP Address ........................................ The IP Address of the Skyline Wireless
Broadband Gateway, as seen by devices on the Internet.
Network Mask .................................. The Network Mask for the Internet IP
Address.
Default Gateway............................... IP Address of the Router/Gateway on the
Internet.
DHCP Client ...................................... Displays Enabled or Disabled, indicating
whether this Skyline Wireless Broadband Gateway is acting as a DHCP client on
the Internet.

Broadband Status - PPPoE

This screen shows current information about your broadband configuration using
PPPoE to connect to your ISP.
Buttons:

Status

Hardware (MAC) Address ................. The hardware address of the Skyline
Wireless Broadband Gateway, as seen by devices on the Internet.
Use the Connect button to establish a connection to your ISP if you do
not have Connect in Demand enabled (see page 32). Use the Discon-
nect button to hang up the connection to your ISP. The Clear Log but-
ton deletes all data in the Log, and the Refresh button updates the
Log data. The Skyline Wireless Broadband Gateway/Local Network
Status link takes you to that status page (see page 30).
32