Configure The Broadband Port For Pppoe - Proxim Skyline User Manual

Configuration

Configure the Broadband Port for PPPoE

1.
2.
3.
Open the Configurations page of the web utility. In the Broadband Port
section, click the PPPoE radio button, then click Configure.
Enter the necessary information into the fields provided:
• Account/User Name: Enter your account or user name. The user name
might be something like yourname@yourdomain.com or simply yourname,
depending on your ISP.
• Password/Verify password: Enter your password into the fields provided.
• IP Address provided by ISP: If your ISP has not provided you with a fixed IP
Address, leave the Dynamic radio button selected. If your ISP has provided
you with a fixed IP Address, click the Fixed button and enter the IP Address
into the field provided.
• Idle Time-Out: Enter zero into the Idle Time-Out field if you want to remain
connected to your ISP continuously.
• Connect On Demand: Leave the Enable box checked to allow your computer
to connect to the Internet.
Save your changes and finish configuration. After restarting your web
browser, you should be able to connect to the Internet from computers on
your network.
20