Using User Defined Virtual Servers; Exposed Computer - Proxim Skyline User Manual

Advanced Configuration 41

Using user defined virtual servers

To create a new server: Click the Clear Form button. Enter the required data. Click
Add.
To modify a server: Select it from the drop-down list. Click Get Data. Make any
desired changes. Note that you can Enable and Disable a Server using this
process. Click Update.
To delete a server: Select it from the drop-down list. Click Delete.
To list all servers: Click the List All button.

Exposed Computer

This feature allows one computer on your local network to be exposed to all users
on the Internet, allowing unrestricted two-way communication.
WARNING! Any Internet user who knows this address can connect to the Exposed
Computer. Using this feature is a security risk.
The only data required is the Local Network IP Address. Enter the IP Address of
the computer on your local network which will become the exposed computer.
The exposed computer will be able to receive all data packets that are sent to the
Skyline Wireless Broadband Gateway's IP Address.
IMPORTANT! To allow unrestricted access to the exposed computer, the firewall
will be disabled, creating a security risk. You should use this feature only if the
Special Applications feature is insufficient to allow an application to function
correctly.