Using Timbuktu Pro - Proxim Skyline User Manual

70
12. Set up your servers for Exchange Files sessions as follows:
13. Click the Add button.
Using Timbuktu Pro with the Skyline Wireless Broadband Gateway
Timbuktu Pro uses a dynamic UDP port for initiating a request for
permission to access services without a user name and password setup.
This software also uses dynamic TCP ports for Chat, Notify and Intercom
functions. In order to use these functions or request permission, the
system on the local network must be set up as an exposed computer.
Timbuktu Pro uses a user name and a password for security and this must
be set up prior to connecting through the gateway from systems on the
Internet to systems on the local network. Without a user name and
password defined in the Timbuktu Pro settings, the gateway settings
described above will not work and the local network system will need to
be setup as an exposed computer.
The Skyline Wireless Broadband Gateway can only have a maximum of 10
virtual server settings enabled total. This includes both user defined
virtual servers and pre-defined virtual servers. Make sure that using the
multiple server settings required for Timbuktu does not exceed this limit.