Configure The Broadband Port For A Fixed Ip Address - Proxim Skyline User Manual

Configuration
3.

Configure the Broadband Port for a Fixed IP Address

1.
2.
3.
Save your changes and finish configuration. After restarting your web
browser, you should be able to connect to the Internet from computers on
your network.
Open the Configurations page of the web utility. Leave the default Direct
Connection selected in the Broadband Port section, and click Configure.
Enter the necessary information into the fields provided:
• Device Name: : : : Enter any host name, network name or client ID given to you
by your ISP.
• Hardware (MAC) Address: : : : If your ISP asks for the MAC Address of the
device connecting to the cable/DSL modem, give them this information. The
Hardware (MAC) Address Screen link opens the Hardware (MAC) Address
Screen. See page 28 for more information about this link.
• IP Address: : : : Enable the Fixed IP Address button and enter all of the neces-
sary information provided by your ISP for your connection including the IP
Address, Network Mask and Gateway IP Address.
Save your changes and finish configuration. After restarting your web
browser, you should be able to connect to the Internet from computers on
your network.
19