Advanced Configuration
40
User Defined Virtual Servers
If the type of server you wish to use is not listed on the Virtual Server screen, you
can define it using this feature.
Existing servers
Existing Virtual Servers are listed here. Use the pop-up menu to select the server
you want.
Data for this server
Name ................................................ Enter a name to identify each server entry.
Enable .............................................. Use this to Enable or Disable support for
each server, as required.
IP Address ........................................ The IP Address of the computer on your
local network which is running the server software.
Protocol ............................................ Select the protocol (TCP or UDP) used by
the server.
Internal Port Number........................ Enter the port number used by the server to
connect to clients.
External Port Number....................... The port number used by clients when
connecting to the server. This is normally the same as the Internal Port Number. If
it is different, the Skyline Wireless Broadband Gateway will allow you to configure
the server to use one port address, while clients use a different port address.