Thermo Scientific AquaSensors AnalogPlus 1.0 User Manual page 2

Safety Information
Thermo Scientific AquaSensors
The Thermo Scientific AquaSensors AnalogPlus 1.0 inch Contacting
Conductivity sensor shall be installed and operated only in the manner
specified. Only a skilled, trained or authorized person should carry out
installation, setup and operation of the sensor system.
Before using the sensor, make sure that the sensor cable is
connected as specified. Failure to do so may result in permanent
damage to the sensor or controller.
Protection against electric shock will be achieved only by observance
of the corresponding installation rules.
™ ™
AnalogPlus Contacting Conductivity Sensor User Guide 2