Dimensional Data
Drain is shown exiting left hand side of unit (as facing 'fan
side' of unit). Drain is located 30.7" from 'filter side' of unit.
Figure 8.
Condensate drain location
Note: Unit is not internally trapped. Installer must
externally trap the condensate line.
Service Clearances
Table 8.
Service/code clearance requirements
Side
Front
Left Hand Starter
Left
Right Hand Starter
Left Hand Starter
Right
Right Hand Starter
Inlet
20
30.7
Distance - in (mm)
42 (1066)
Fans, Compressors, Condensers, Refrigeration access
42 (1066)
9 (229)
9 (229)
42 (1066)
18 (457)
3.7
1.5 DIA CONDENSATE
DRAIN PIPE
Purpose
NEC Code Requirement (Starter Panel)
NEC Code Requirement (Starter Panel)
Provides uniform air flow
PKG-SVX027A-EN