Controls
Navigating the TD7
TD7 Home Screen
To access the TD7 home screen, press the Home button in
the upper left of the screen.
Figure 40. Home screen
A
B
G
Screen Element Description
A
Home button
B
Displays the local Auto Stop button and displays the occupancy, Heat/Cool Mode, and Unit Information.
C
Displays information about the Air Filter.
D
Displays the Discharge Air Temperature, Setpoint, and Return Air Temperature. A red light displays if the sensor fails.
E
Displays when cooling is active and indicates the % of cooling capacity currently utilized.
The Water Side Econ Info tile is included on units with an economizer installed. Displays a snapshot of economizer operations
F
and the mode of the economizer.
G
Displays fan status (on, off), duct static pressure setpoint and actual, and fan percentage.
Compressor 1 is always the lead compressor. This tile displays the compressor pressures, superheat, VFD signal, condenser
H
water values (if included), and operating mode.
Tiles for compressors 2-4 display, depending on the number of compressors installed. The VFD compressor is always the lead
I
compressor. The fixed speed compressors rotate to even out run time. Compressor tiles displays the compressor pressures,
superheat, VFD signal, condenser water values (if included), and operating mode.
J
Displays the entering and leaving temperatures, pump command, flow status, and the condenser alarm status.
52
C
D
H
I
E
F
J
PKG-SVX027A-EN