Siemens SIMATIC ET 200PA SMART Operating Instructions Manual page 215

Marking for Australia and New Zealand
The ET 200PA SMART meets the requirements of
EN 61000-6-4: 2007 + A1: 2011.
IEC 61131
The ET 200PA SMART meets the requirements and criteria of
IEC 61131-2 (Programmable Logic Controllers, Part 2: Equipment requirements and tests).
Use in industrial environments
SIMATIC products are designed for industrial applications.
Table 10-21 Use in industrial environments
Field of applica‐
tion
Industry
Use in residential areas
Note
The ET 200PA SMART is designed for use in industrial areas; using it in residential areas could
disturb radio and TV reception.
If the ET 200PA SMART is used in residential areas you must ensure limit class B in
accordance with EN 55011 regarding the emission of radio interference.
Suitable measures for achieving the required Class B radio interference level include, for
example:
● Installation of the ET 200PA SMART in grounded control cabinets/boxes
● Use of filters in supply cables
ET 200PA SMART
Operating Instructions, 06/2019, A5E34192013-AB
Noise emission requirements
EN 61000-6-4: 2007 + A1: 2011.
ET 200PA SMART I/O modules
10.8 Standards and approvals
Noise immunity requirements
EN 61000-6-2: 2005
215