Fronius MagicWave 190 Operating Instructions Manual page 99

Sequence:
1 2
Welding
1
At the end of the welding action, briefly raise the welding torch
2
The arc length is increased significantly.
Lower the welding torch
3
- The arc length is reduced significantly
- The Comfort Stop function has been activated
Keep the welding torch at the same height
4
- The welding current is continuously decreased (downslope).
- The arc goes out.
IMPORTANT! The downslope is preset and cannot be adjusted.
Raise the welding torch from the workpiece
5
3 4 5
99