Create Users And Roles; Creating A User - Fronius MagicWave 190 Operating Instructions Manual

Create users and roles

Creating a user

If an NFC key is assigned to the predefined user "admin" under Defaults / User man-
agement / Create user - overview, the user administration is activated.
1
2
The list of existing users is displayed.
3
4
The keyboard is displayed.
For privacy reasons, only person identity numbers and not full names should be en-
tered when creating users.
5
6
"Edit user" is displayed.
7
8
118
NOTE!
Defaults / User management / Create user - overview
Press the adjusting dial
Turn the dial and select "Create new user"
Press the adjusting dial
NOTE!
Enter the user name by turning and pressing the adjusting dial
Select "OK"
By turning the dial, select the desired entry, press the dial to edit the entry:
- Username *
- Role **
- First name *
- Last name *
- Language **
- Unit **
- Standard **
- NFC card:
Follow the instructions shown
(hold the new NFC key on the NFC key read zone and wait for the recognition
confirmation)
- Web password *
- Mobile device:
Follow instructions on the WeldConnect app
* Input via keyboard
** Select from list
Select "Save" and press the adjusting dial