Update - Fronius MagicWave 190 Operating Instructions Manual

Update

Update The power source firmware can be updated in the "Update" entry.
The current version of the firmware on your power source is displayed.
The update file can be downloaded via the following link, for example:
http://www.fronius.com/transtig
http://www.fronius.com/magicwave
To update the power source firmware:
1
2
3
SmartManager is not available during the restart.
After the restart, SmartManager may not be available any more.
If you select "No", the new software functions are activated when you next switch the de-
vice on/off.
4
5
Organise and save the update file
Click on "Search update file"
Select and open the update file
The selected update file is displayed on the power source SmartManager under "Up-
date file".
Click on "Update"
A progress bar is displayed above the update process.
When this reaches 100%, you will be prompted to restart the power source.
To restart the power source, click on "Yes"
The power source restarts; the display goes black for a short time.
The Fronius logo is shown on the power source display during the restart.
Once the update has been completed successfully, a confirmation and the current
firmware version are displayed.
You can now log on to SmartManager again
135